- The
supplied Software runs under MS Windows Operating Systems:
Windows XP, Windows 7, 8 and 8.1
- Mode
of Operation: Manual (single Measurement) and Automatic
(continuous Monitoring)
- Measurement
Interval (Sampling Time): selectable from 2 Second up
to 1 Hour;
Monitoring Time Limit can be set
- Gliding
Average Filter: can be set from averaging 1 to 10 samples
- pH
Automatic Temperature Compensation is available for pH
measurements
- Single
channel and Multi-channel Calibration Facility
- Measurements
are Date and Time stamped
- Measurments
are displayed in Real-time in Table format and view in Meter
mode
- Measurement
Data are stored on Hard disk
- Parameter
values are displayed in mV, pH, ppm, mmol/L, °C and °F
units
- Data
can be retrieved, viewed and exported to many other Software
packages
- Data
are in Text form using ASCII Characters, can be viewed in
notepad and MS Excel
- Simple,
transparent Communication Protocol enables the customer to
write his own Software: e.g. by using LabVIEW, Daisy Lab,
C++, Visual Basic, etc.
Top
|
- Enclosure:
ABS, Protection
Class: IP62
- Connection
to the Computer: built in USB Data Cable
- Isolation:
The Sensor Amplifiers are fully galvanically isolated from
the Communication and Power Supply
- Sensor
Amplifiers: High Quality Electrode Amplifiers. Input Resistance
> 1 Terra Ohm, Bias Current < 1 pA
- Sensor
Connections:
pH, ORP and Ion-selective Electrode: BNC Connectors.
External Reference Electrodes: 2 mm sockets
Temperature Sensor: Isolated 3.5 mm socket
- Sensors:
pH, ORP and Ion selective Electrodes: Accepts practically
all Types of electrodes, inclding Micro electrodes
Temperature Sensor:
Accepts NTC Thermistor temperature sensor
- Measuring
Range and Resolution:
pH Range: 0 to 14, Resolution: 0.01 pH unit
ORP Range: -1000 to +1000 mV, Resolution: 0.1 mV
Ion-Concentration: depending on the Electrode, all
types of Electrodes can be connected
Temperature Range: 0 to 100°C, Resolution 0.1°C
Accuracy:
±0.2°C in the range of 10°C to 70°C
±0.5°C in the range of 0°C to 100°C
- Conformance
Marking and Safety: The system is CE and WEEE marked and
fulfils all standard safety (not medical) regulations
- Dimensions:
MM-PIT-2U: 160x95x36 mm (without connectors)
MM-PIT-4U: 280x140x40
mm (without connectors)
- Weight:
MM-PIT-2U: 400 g
MM-PIT-4U: 700 g
|
